FEATHER CUTTING TEMPLATE PRE-GLUE (1-40)
Feather cutting template. You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather! Over 80 different shapes available, medieval template, eastern template Easy to use The clear Perspex allows you to see your workpiece Both...
FEATHER CUTTING TEMPLATE PRE-GLUE (41-80)
Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather!✓Over 120 different shapes are available✓Easy to use✓The clear Perspex allows you to see your workpiece✓Both Left and Right-wing available✓Can...
ROTARY KNIFE, ROLLING BLADE CUTTER
A must-have for hobby and professional fletchers alike. (we also use it to cut leather etc).careful, the blade is super sharp, scalpel-like, and will not stop for your fingers.Works extremely well on a flat and proper cutting surface with our feather cutting templates. (colors may vary)Spare blad...
TOP HAT THREAD CUTTER
Tophat thread cutter to go with Tophat screw-on arrowheads and adapters Stainless steel available for 5/16, 11/32, and 23/64 wooden shafts
SUPER CLINGY GLUE 20g
FAIRBOW SUPERCLINGYNo Snot, No spitting here, not even a dragon could get loose after being glued with this industrial quality super glue. And there is 20 ml. in the bottle a real bargain.Superglue nice and thick.
FEATHER CUTTING TEMPLATE PRE-GLUE (81-120)
Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather!✓ Over 120 different shapes are available✓ Easy to use✓ The clear Perspex allows you to see your workpiece✓ Both Left and Right-wing available...
FLETCH TITE PLATINUM BOHNING
Only the best glue for gluing your feathers to your shafts.✓Instant glue designed for vanes, points, inserts, swedged nocks, outserts & bushings✓Works on all shaft types✓Clamp time 30 seconds, cure time 2 hours✓Medium viscosity✓3/4 oz
CUTTING MAT, ROTARY CUTTER SURFACE
Rotary Mat, cutting surface, 45 x 30 cm (a3) Perfect surface protection for use with a rotary cutter and our perspex feather templates.
PLASTIC TAPERTOOL FOR WOODIES 5/16 OR 11/32 OR 23/64
Plastic Taper toolLike and old fashioned pencil sharpener but better and in the correct tapering/angle for your wooden arrows. Works for 5/16 or 11/32 or 23/64 wooden shafts Replaceable knives Tapering for nocks and arrowheads
CENTER DRILL TOOL FOR 5/16, 11/32, OR 23/64 SHAFTS
center drill tool by Arrow Doctor With this tool and an electric drill, you can make a nice centered hole for the tang of an Arrow Doctor Manchu nock.The hole made is approx. 4 mm wide.✓ Made from anodized aluminum✓ Replaceable drill✓ Made for 5/16 OR 11/32 shafts OR 23/64 wooden or Bamboo shafts
WATUSI BACKSTRAP SINEW PROCESSED APPROX. 25 INCHES AND 50 GRAMS
Dried processed Watusi backstrap sinew.For backing self bows and tying fletchings or points to arrows.✓ Sold per 50 gram (approx. 2 ounces).✓ Average length 25 inches.✓ Processed, and air dried
SUPERCLINGY 2.0 FAIRBOW SUPERGLUE 50G BOTTLE
FAIRBOW SUPER CLINGY 2.0No spitting here, not even a dragon could get loose after being glued with this industrial quality super glue. There is 50 gram in a bottle, real bargain.Superglue nice and thick.Medium viscosity (not gel, not water).
FILE 'N RASP, THE IDEAL 4WAY BOWYERS AND FLETCHERS RASP
This rasp is ideal for the home bowyer and professional bowyer alike. A handy tool. Four different rasps and files build into one well ergonomically designed tool. Cicely rounded corners and easy to hold.Every working surface is approximately 1 x 4 inches.4 in one:Less space in your toolbox, less...
TOPHAT PARALLEL SCREW-ON ADAPTER
These adapters allow you to use screw-in arrowheads (Saunders, broadheads, etc) on your wooden arrows.Use the thread cutter to cut the thread, and screw on the adapter with the assembly tool by Tophat. works like a dream.The adapters are made from high-grade aluminum and weigh 40-grain each
TEMPLATE SET, FAR EASTERN SHAPES, 8 TEMPLATES
Template set, Far Eastern shapes, 8 templates contains :nrs 2, 3, 54, 60, 61, 62, 63 and 66. nr. 2, Manchu, 250 mm nr 3, japanese, 6 inch nr 54, Korean XL, 7.5 inch nr 60, Ottoman, 3.3 inch nr 61, Ottoman XL, 3.3 inch nr 62, Manchu Mini, 7.5 inch nr 63, Ottoman Military, 7 inch nr 66, Korean T...
BOHNING HOT MELT FERR L TITE
Ferr-L-Tite was Bohning's first product, developed in 1946, and has been the archery industry's standard ever since! This hot melt adhesive is designed for points, inserts, and outserts on wood and aluminum shafts (for carbon, we recommend Ferr-L-Tite Cool Flex). It requires an open flame for ins...