CABINET SCRAPER TOOL
Scraper blades are indispensable for smoothing wooden surfaces, removing marks left by planing and routing, cleaning glued joints and leveling uneven varnish coats. Sharpened properly and burnished with a fine hook, they are capable of removing the finest shavings and leaving a smoother and more ...
TUDOR ARROWHEAD HAND FORGED (no. 3)
Hand-forged Tudor arrowhead after historical model. 3/8 or 1/2 inch socket, good round and deep. Approx. 10 gramā Approx. 4, 6 or 10 gramā For 11/32, 3/8 or 1/2 shaftsāĀ Sold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your ...
TUDOR ARROWHEAD HAND FORGED (no. 4)
Hand forged Tudor arrowhead after historical model. 1/2 inch socket, good round and deep. Approx. 10 gram Approx. 10 gram 1/2 shafts Sold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your next arrowheads (approx. 4-6 weeks)
BODKIN ARROWHEAD K41, ARROW HAND FORGED 11/32, 3/8, 1/2
Bodkin,Ā hand-forged 3/8 or 1/2 inch socket, approx. 17 gram.āApprox. 5, 7 or 17 gram (80 grain, 110, 265 grain)āfor 11/32, 3/8 or 1/2 inch shaftsāSold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your next arrowheads (approx...
FIRECAGE ARROWHEAD, ARROW HAND FORGED 11/32, 3/8, 1/2
Firecage, hand-forged 11/32, 3/8 or 1/2 inch socket, approx. 40 gram. Approx. 40 gram for 11/32, 3/8 or 1/2 inch shafts Sold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your next arrowheads (approx. 4-6 weeks)
FIRE ARROWHEAD HOOKED, ARROW HAND FORGED 11/32, 3/8, 1/2
Firehook (single), hand-forged 11/32, 3/8 or 1/2 inch socket, approx. 25 gram. Approx. 25 gram for 11/32, 3/8 or 1/2 inch shafts Sold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your next arrowheads (approx. 4-6 weeks)
FIRE ARROWHEAD HOOKED, ARROW HAND FORGED 11/32, 3/8, 1/2 (double)
Firehook (double hook), hand-forged 11/32, 3/8 or 1/2 inch socket, approx. 25 gram. Approx. 28 gram for 11/32, 3/8 or 1/2 inch shafts Sold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your next arrowheads (approx. 4-6 week...
FIRE NEEDLE ARROWHEAD, ARROW HAND FORGED 11/32, 3/8, 1/2
Fire needle, hand-forged 11/32, 3/8 or 1/2 inch socket, approx. 20 gram. Approx. 20 gram for 11/32, 3/8 or 1/2 inch shafts Sold per piece These arrowheads are hand forged for you per order. Please allow the master blacksmith some time to make your next arrowheads (approx. 4-6 weeks)
AVALON FOAM TARGET 3 X 24 X 24 INCHES
Lightweight good quality foam target. This type of target is not sensitive to rotting, so leaving it outside in de rain is not a problem.(Foam feet can be ordered separately)āĀ Layered foam targetāĀ 7 x 60 x 60 CM (3X24X24 INCHES)ā Stops most arrows (although over 45 lbs will go through)āĀ Good valu...
AVALON TARGETFACE
FITA and World Archery Target faces By Avalon.Fiber-reinforced making these long-lasting and withstanding rain better. Target face reinforced 40 x 40 cm, or 60 x 60 cm Good value for money,
CARTEL ARROW PULLER GRIP
Rubber grip with metal clip.This grip helps you with gripping arrow shafts while applying screw-on arrowheads and pulling arrows out of tough targets.
TAPERJIG 0,001 / 0,002 / 0,003 INCH
Taperjig to get the correct and required tapered laminations for your laminated (long-) bows.Our jigs are CNC cut in our own workshop. They can be either 80 or 40 inches long (to do 1 limb or two limbs at the same time)Ā These are made from MDF and some simple assembling will be required. CNC pre...
STAINLESS STEEL RULER, 24 INCH / 60 CM
Stainless steel ruler with both inches and centimeters. 24 inches or 60 centimeters. On the backside, it has a conversion table for imperial to metric. a very useful tool in bow and arrow making!
HORSEBOW GLUE UP MOLD
This kit consists of 3 layers of MDF board precision-cut inhouse with our CNC router, and 15 wooden dowels.You will need to do some assembly, glue the boards together to create an almost 2-inch wide mold. This mold is exactly the same dimensions as those we use to make our Katsa, Kurgan and Magya...
FAUX HORN WHISTLING ARROWHEAD 8 MM PER THREE PCS
Whistling arrowhead. This arrowhead is made from black plastic.Ā The arrowhead can be opened to pry the dirt out. ā Fit over 8 mm (can easily be adapted for larger diameter shafts)ā The top can be openedā Weighs approx 100 grainā Sold per three piecesā Approx 5.5 x 3.5 cm or 2.5 x 4.5 cm
SHIELD ARROW, SET OF 6
Wooden arrows with our Shield shape feathers. We varnish the shafts before gluing the fletchings on for you.Ā Upon request, we can shorten the 32-inch shafts and glue and screw-on field points for you. We gladly make your custom arrows!āĀ Varnished shaftsāĀ Northern pine shaftsāĀ 5/16 up to 40-45 lb...




























