Tool
BROWN KINGS EBONY VENEER 72 X 2 INCH 2 STRIPS
Our veneer strips are 72 inches long, 5 cm wide (almost 2 inches) backed with fleece, and ideal for your bow building projects.We recommend using a grit 100 sanding paper on a sanding block to remove the fleece just before gluing, but we know of bowyers who don't bother and leave the fleece on.ā...
CABINET SCRAPER TOOL
Scraper blades are indispensable for smoothing wooden surfaces, removing marks left by planing and routing, cleaning glued joints and leveling uneven varnish coats. Sharpened properly and burnished with a fine hook, they are capable of removing the finest shavings and leaving a smoother and more ...
CARBON INLAY 2 INCH WIDE 78 INCHES LONG
Carbon inlay 2 inch wide 78 inches long.This carbon comes in a flexible 'cloth' strip. (Upon request we can supply any length or quantity) 250 gram/m2
CARBON LAMINATE 0.7 MM UD 1.85 CM
Fairbow Pultrusion UD Carbons strip. These strips have been sanded on both sides for your convenience.These just require a light sanding (do not use white spirit, acetone etc) just before your glue-up .ā 185 cm long (73 inch) (any length can be cut for you)ā 45 mm wide (approx. 1.75 inch)ā 0.7 ...
CARTEL FLETCHING JIG
ā¬24,95
CARTEL FLETCHING JIG
By now a famous Jig used all over the world.Not an original, but a classic in its own right, and very affordable.We have been using these for 15 years. All they need is the occasional bit of lubricant.Tip:Before using the Jig, put some vaseline, string wax, or lubricant on the inside of the clamp...
CARTEL FLETCHING JIG HELICAL RW CLAMP ONLY
For the famous Jig, this is the helical clamp for right wing feathers. (just the clamp) Making your arrows spin more, getting a straighter shot (all be it slower), and making the arrow more forgiving. This item is the Right Wing Helical clamp to complement your Cartel Fletching Jig.This clamp hel...
CENTER DRILL TOOL FOR 5/16, 11/32, OR 23/64 SHAFTS
center drill tool by Arrow Doctor With this tool and an electric drill, you can make a nice centered hole for the tang of an Arrow Doctor Manchu nock.The hole made is approx. 4 mm wide.ā Made from anodized aluminumā Replaceable drillā Made for 5/16 OR 11/32 shafts OR 23/64 wooden or Bamboo shafts
COROMANDEL VENEER WOOD 0.5 X 45 X 1050 MM
Coromandel (macassar or striped ebony) veneer wood, (Bot: Diospyros celebica) approx. 0.5 x 45 x 1050 mm
CUTTING MAT, ROTARY CUTTER SURFACE
Rotary Mat, cutting surface, 45 x 30 cm (a3) Perfect surface protection for use with a rotary cutter and our perspex feather templates.
EMT (Easy Measurement Tool) in clear Perspex or MDF based wood
Fairbow EMT (easy measurement tool) in Clear Perspex or MDF based wood. All the sizes for arrows we use, along with feather length indicated in inches, feather hight and length for EWBS and DWS arrows.A must have for every fletcher.
FAIRBOW FIBERGLASS LAMINATION UL-GLASS FIBERGLAS
Fairbow UL Glass is a continuous fiberglass laminate. After having problems with the variations in quality from different suppliers we have decided to have our own glass produced.We have started using this glass in the Bowman bows and will slowly incorporate it in our other glass bows.ā Our glas...
Feather Cutting Template EWBS DWS cut-on-shaft
Feather cutting template EWBS DWS. Easy to use, clear Perspex feather cutting template . First glue on the full height-, uncut feather, then using the template, cut inside the template...
FEATHER CUTTING TEMPLATE PRE-GLUE (1-40)
Feather cutting template. You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather! Over 80 different shapes available, medieval template, eastern template Easy to use The clear Perspex allows you to see your workpiece Both...
FEATHER CUTTING TEMPLATE PRE-GLUE (41-80)
Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather!āOver 120 different shapes are availableāEasy to useāThe clear Perspex allows you to see your workpieceāBoth Left and Right-wing availableāCan...
FEATHER CUTTING TEMPLATE PRE-GLUE (81-120)
Feather cutting template You will need a rotary knife and a smooth surface (cutting mat) to work with.Remember to cut towards the beginning of the feather!ā Over 120 different shapes are availableā Easy to useā The clear Perspex allows you to see your workpieceā Both Left and Right-wing available...
FILE 'N RASP, THE IDEAL 4WAY BOWYERS AND FLETCHERS RASP
This rasp is ideal for the home bowyer and professional bowyer alike. A handy tool. Four different rasps and files build into one well ergonomically designed tool. Cicely rounded corners and easy to hold.Every working surface is approximately 1 x 4 inches.4 in one:Less space in your toolbox, less...